CCS
3.3.2 Download and Debug the WLAN Station Example
1. To differ the debug application from the one programmed to the flash, it is possible to make a simple
change to the application name before it is rebuilt. The application name is defined in
"network_terminal.h" - see in
output.
36
Use the Debugger/IDE
Figure
3-2. The change will be reflected in the first lines of the serial
Figure 3-2. Application Name Definition
Copyright © 2017–2018, Texas Instruments Incorporated
SWRU461B – February 2017 – Revised June 2018
Submit Documentation Feedback
www.ti.com