Ccs; Rebuild The Simplelink™ Library For Debug Configuration - Texas Instruments CC3220 Getting Started Manual

www.ti.com
3.3

CCS

3.3.1 Rebuild the SimpleLink™ Library for Debug Configuration
The SimpleLink library is already compiled for both FreeRTOS and TI-RTOS (both archive files are
available in corresponding directories under <sdk-installation-path>\source\ti\drivers\net\wifi\ccs\).
If from any reason the SimpleLink library must be rebuilt, the Build Configuration must be specified for the
right OS (as seen in
1. Choose the relevant debug configuration (os_debug for getting started with WLAN station) from Project
→ Build Configurations → Set Active, as shown in
2. Compile the SimpleLink library for the selected configuration.
3. Rebuild the application.
SWRU461B – February 2017 – Revised June 2018
Submit Documentation Feedback
Figure 3-1).
Figure 3-1. Select Debug Configuration
Copyright © 2017–2018, Texas Instruments Incorporated
Figure 3-1.
CCS
35
Use the Debugger/IDE