Browse To Demo Project For Import Function; When Ccs Has Found The Project - Texas Instruments LaunchPad MSP-EXP430F5529LP User Manual

www.ti.com
3.2.1 CCS
CCS v5.4 or higher is required. When CCS has been launched, and a workspace directory chosen, click
Project and then Import Existing CCS Eclipse Project. Browse to the desired demo's project directory
containing main.c. This is either simpleUsbBackchannel or emulStorageKeyboard (see
Selecting the \CCS subdirectory also works. (The CCS-specific files are located there.)
Click OK, and CCS should recognize the project and allow you to import it. The indication that CCS has
found it is that the project appears as shown in
SLAU533B – September 2013 – Revised June 2014
Submit Documentation Feedback
Figure 24. Browse to Demo Project for Import Function
Figure 25. When CCS Has Found the Project
MSP-EXP430F5529LP LaunchPad™ Development Kit User's Guide
Copyright © 2013–2014, Texas Instruments Incorporated
Figure 25, and it has a checkmark to the left of it.
Software Examples
Figure 24).
31