Table of Contents
Advertisement
Chapter 2
Installing the Device
IMPORTANT!
The user is responsible for the operating environment of the device, including maintaining the integrity
of all protective conductor connections and checking equipment ratings. Make sure to review all
operating and installation instructions before commissioning or performing maintenance on the
device.
1.
Review the relevant certification information for any regulatory requirements.
For more information, refer to
Review the RUGGEDCOM RST2228 Modules Catalog for special installation or regulatory requirements
2.
related to the modules installed in the device.
For more information, refer to
3.
Unpack and inspect the device.
For more information, refer to
Mount the device.
4.
For more information, refer to
5.
Connect the failsafe alarm relay.
For more information, refer to
6.
Connect power to the device and ground the device to safety Earth.
For more information, refer to
7.
Connect the device to the network.
For more information, refer to
8.
Configure the device.
For more information, refer to
Section 2.2
Unpacking the Device
When unpacking the device, do the following:
1.
Inspect the package for damage before opening it.
2.
Visually inspect each item in the package for any physical damage.
3.
Verify all items are included.
IMPORTANT!
If any item is missing or damaged, contact Siemens for assistance.
Section 2.3
Mounting the Device
The RUGGEDCOM RST2228 is designed for maximum mounting and display flexibility. It can be ordered with
adapters that allow it to be installed in a 48 cm (19 in) rack or directly on a panel.
8
Section 6.1,
"Approvals".
"Related
Documents".
Section 2.2, "Unpacking the
Section 2.3, "Mounting the
Section 2.4, "Connecting the Failsafe Alarm
Section 2.5, "Connecting
Chapter 4, Communication
Section 3.2, "Configuring the
Device".
Device".
Relay".
Power".
Ports.
Device".
RUGGEDCOM RST2228
Installation Guide
Unpacking the Device
Hide quick links:
Advertisement
Table of Contents
