Electrical Safety; Compliance Label With Safety Warning Label - IBM 5147-084 Installation And User Manual

Figure 3. Compliance label with safety warning label
CAUTION:
Before removing a PSU module, disconnect the power cord from that module. Otherwise, modules at
the rear of the enclosure are hot-swappable.
Do not use open drawers to support any other equipment.
Figure 4. Drawer caution label

Electrical safety

Operate the enclosure from a power supply input voltage range of 200 to 240 VAC, 50 to 60 Hz only.
A suitable power source with electrical overload protection must be provided in order to meet the
requirements in the technical specification.
All power supply cords must have a safe electrical ground connection. Check the connection to ground of
the enclosure before you switch on the power supply.
5
Chapter 1. Appliance safety precautions