Table of Contents
Advertisement
[Alarm]
With checks to several boxes, it output alarm when it meets one of these conditions.
1
2
3
4
5
6
7
8
9
10
11
Item
1
Select CH *
2
Output type
3
Stand-by power
4
Active power
5
Reactive power
6
Apparent power
7
Over current
8
Under current
9
Power interruption
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
12
14
15
16
17
18
19
20
21
22
23
Select CH to set.
Select pulse output type.
< List >
Integral power pulse, Alarm, General output
(initial: Integral power pulse)
Select phase to monitor and set threshold to use for output.
<List & Range>
Target phase : Phase1, Phase2, Phase3, ALL (initial: ALL)
Threshold: 0.1 to 100.0% (initial: 0.1%)
Elapsed: 0 to 9999min (initial: 0)
Select phase to monitor and set threshold to use for output.
*Select 'Total' when measuring 3P3W.
<List & Range>
Target phase:Phase1, Phase2, Phase3, ALL, Total
OFF threshold : 0.00 to 9999999999.99
ON threshold : 0.00 to 9999999999.99 (initial: 9999999999.99)
Select phase to monitor.
*The threshold is the ratio that is set at 'Setting for Power
Measurement'.
< List >
Target phase:Phase1, Phase2, Phase3, ALL (initial: ALL)
13
Description
(initial: 9999999999.99)
(initial: Total)
Advertisement
Table of Contents
