Settings For Pulse Output - Panasonic KW2M-A User Manual

4.5.5 Settings for Pulse Output

It uses the measurement value of main unit CH1 for pulse output CH1, it uses the measurement value
of main unit CH2 for pulse output CH2.
[Integral power pulse]
1
4
5
6
Item
1 Select CH *
2 Output type
3 Unit for output
4 Direction
5 Target phase
6 Pulse width
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
2
3
Select CH to set.
Select pulse output type.
< List >
Integral power pulse, Alarm, General output
(initial: Integral power pulse)
Set unit used for pulse output.
< List >
0.001, 0.01, 0.1, 1, 10, 100kWh (initial:0.001)
Select the direction of power (import or export) for using as a
threshold for pulse output.
< List >
P, -P (initial: P)
Select phase to monitor in order to judge the output.
* Select 'Total' when it measures 3P3W.
< List >
Phase1, Phase2, Phase3, Total (initial: Total)
Set pulse width.
< Range >
1 to 100ms (initial:1)
Description