Output Specifications (Only For Main Unit) - Panasonic KW2M-A User Manual

7.3 Output Specifications (only for main unit)

Number of output point
Insulation method
Output type
Output capacity
Output mode (OUT1/OUT2)
Pulse width
Pulse by
Pulse output
integral power
unit
Type
Alarm
Event
Alarm reset
Protection element
Indicator
Output signal
Alarm output
Output capacity
<Internal output circuit>
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
2 points *Insulate between output terminals
MOSFET relay
1a
100mA, 30V AC/DC
・Pulse by integral power
・Output by alarm or events
1 to 100ms (set with setting mode)
0.001kWh/ 0.01kWh/ 0.1kWh/ 1kWh/ 10kWh/ 100kWh
Stand-by alarm/ Under voltage alarm/ Over voltage alarm/
Power interruption alarm/ Under current alarm/
Over current alarm/ Active power alarm/ Reactive power alarm/
Apparent power alarm/ PF alarm/ Over frequency alarm/
Under frequency alarm/ Voltage harmonics alarm/
Current harmonics alarm/ Voltage THD alarm/
Current THD alarm/ Unbalanced voltage alarm/
Unbalanced current alarm/
Power demand alarm/ Current demand alarm/ counter output/
level output (external control)
Self-reset (according to the setting) / Manual-reset
Varistor
Lighting alarm mark and blinking backlight
2 points (can set separately)
Normal; OFF Alarm; ON
100mA, 30V AC/DC
(set with setting mode)