Settings For Optional Functions - Panasonic KW2M-A User Manual

4.4.4 Settings for optional functions

Auto-off
Display backlight turns off automatically when there is no key operation for a long time.
After it passes the setting time, backlight will turn off.
- 1
M
Always turn on : [0]
Turn off after setting time: [1 to 99]
After turns off the backlight, any key operation makes it turns on.
Update cycle
Select update cycle for measuring window.
It updates the display of measured values every setting time.
- 1
M
i s p l a y
D
Reset all integral value
Integral power (active, reactive, apparent) can be reset at one time.
- 1
M
A l l
Reset all : [Yes]
Not reset : [No]
Reset integral value 1
Reset the integral power of 1CH/1-phase (active, reactive, apparent) and integral export power
of 1CH/1-phase (active, reactive).
- 1
M
Reset : [Yes]
Not reset : [No]
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Press <ITEM/＞>, <SHIFT/∧> to set.
p t i o n
O
A u t o F F
O
[Set range] 0 to 99 min. (initial:5)
5 i n
m
SHIFT
ITEM
＞
Press <ITEM/＞>, <SHIFT/∧> to select.
p t i o n
O
u p d a t e
[Set list] 0.5, 1.0, 2.0, 3.0 [s] (initial:1.0)
0 . 5 s
Press <ITEM/＞>, <SHIFT/∧> to select.
p t i o n
O
e s e t
R [Set list] Yes, No (initial: No)
Y e s
*It skips this item when [Yes] is selected for reset all integral value.
Press <ITEM/＞>, <SHIFT/∧> to select.
p t i o n
O
e s e t 1
R
[Set list] Yes, No (initial: No)
Y e s
increase
decrease