ARRAY EQ ____________________________________________________________________________ 12 MAINTENANCE ________________________________________________________________________ 13 TECHNICAL SPECIFICATIONS ___________________________________________________________ 16 USER NOTES _________________________________________________________________________ 17 EU Conformity declaration NEXO SA ZA DU PRE DE LA DAME JEANNE 60128 PLAILLY – France Declare under our sole responsibility that the product Loudspeaker...
If the system seems to be malfunctioning or damaged, stop using it at once and have it repaired by a NEXO qualified technician. Do not expose the system directly to the sun or to the rain, do not immerse it into fluids, do not place objects filled with liquid on the system.
EQUIPMENT EQUIPMENT 3 locations for hanging, 1 on the back and on both side. On the sides, you’ll find a print for speaker stand. 3 locations for connecting, on the back and on both side. Page 4 / 18...
Page 5
EQUIPMENT Assembly on distance rod or speaker stand Place distance rod on the connector plate (M20) of the Sub. Place P12 on the distance rod / monitor stand (diameter of 35mm), IMPORTANT Speaker stand must be rated for P12 weight.
Amplification • The P12 speakers must be used with a NEXO processor to handle EQ, phase alignment, crossover and excursion/thermal protection for the system loudspeaker. There are two NEXO processor series supporting the P12 speakers: NXAMP (4 channels) amplified processors and DTD processors (stereo + sub). DTD processors ensure optimal performances when used with DTDAMP power amplifiers.
WARNING: Do not mix directivity and/or modes P12 MON HF 6060 with P12 MON LF 6060 =====> OK P12 MAIN HF 6060 with P12 MON LF 6060 =====> NOT OK P12 MON HF 9040 with P12 MON LF 6060 =====> NOT OK •...
Page 8
PRESET P12 + Sub Stage monitor applications with Subs (OMNI or CARDIO modes) Front of house applications with Subs (OMNI or CARDIO modes) Page 8 / 18...
When replacing the grille, ensure it is well positioned in the top blade before fasten with quarter-turn screws. CROSSOVER FREQUENCY 60 Hz: Full range application. 85 Hz: Use as « front fill » on stage, complementing a main system. Use with a NEXO subwoofer, e.g. L15. Page 9 / 18...
All P12 accessories are specifically rated in agreement with structural computations. Never use other accessories – including push-pins – when assembling P12 cabinets than the ones provided by NEXO: NEXO will decline responsibility over the entire P12 accessory range if any component is purchased from different supplier.
Page 11
ACCESSORIES PNT-WMADAPT With PNI-WMxxx & PNT-BUMP With PNT-BUMP PNI-CLADAPT Ceiling Adapter, use with HBRK12, VBRK12. PNI-WM330 Wallmount for P12, with WMADAPT Page 11 / 18...
PNT-P12FLGPS Flange dispersion adapter PS PNT-P12FLG9040 Flange dispersion adapter 90° - 40° PNT-2CASE12: FLIGHT CASE FOR 2X P12 PNT-ACC12: FLIGHT CASE FOR P12 ACCESSORIES PNT-COV12: COVER FOR P12 ARRAY EQ The ArrayEQ allows to adjust the system frequency response in its lower range...
MAINTENANCE MAINTENANCE Driver access Unlock the 2 quarter-turn screws, Remove the grille. Remove 8 screws. Remove the stickers. Remove the 2 screws. Remove the horn. To access to the HF diaphragm, remove 4 screws. Page 13 / 18...
Page 14
MAINTENANCE CNX access Remove the screws of the connector inside the handles. Remove the screws of the CNX (6) and of the Passive filter (4). Unplug the CNX from the passive filter. Page 14 / 18...