Page 1
VNI-WS8 DP3419/Rev01 - DI PS8 Wall Bracket Contents: X1 (Arm) X1 (Adapter) Weight: 1.2 kg / 2.7 lb - Read t his docum ent before using. - Keep t his docum ent . - Observe all warnings and caut ions.
Page 2
Dimensions: Adapter mounting • Remove 2 screws from the PS8 and use the 2 screws and the 2 washers provided to fix the adapter. • Please, do not push on the 2 screws while screwing them, to avoid disengaging the bolt that is inside the cabinet.
Page 3
Tilt in horizontal position Adapter / Arm mounting For the wall mount of VNI-WS8, please select screws and mounting location supporting 4 times the system weight. Tighten well to cancel any float between the arm and the adapter. - Read t his docum ent before using. - Keep t his docum ent .
Page 4
Safety device Use the parts provided • NEXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself. • Please check the web site nexo-sa.com for the latest update. - Read t his docum ent before using.