Auriol AFT 77 A1 User Manual page 12

If no outdoor temperature is displayed within
approx. 3 minutes, the temperature station
will stop the reception search. The reception
icon
outdoor temperature panel 4. The system likely
cannot detect a signal due to structural condi-
tions or because the sensor is too far away.
If the device is unable to connect to the out-
door sensor automatically, you can establish
a connection manually:
♦
♦
The temperature station automatically starts
to receive the WWVB signal after 3 minutes,
regardless of whether the outdoor sensor
reception search has been successful or not .
The reception icon
panel 1 . If the reception icon is not flashing
completely ( ) on the display, it means that
the reception of the WWVB signal is too weak
and the time cannot be synchronized . Try to
find a set-up location where the reception icon
flashes completely ( ) on the display .
■
_320042_AFT77A1_Funk-Temperaturstation_LB9.indb 12
turns off and
Press and hold the
reception icon
temperature panel 4 .
Press the TX button z to manually start the
wireless signal for the outdoor sensor .
│
12
US - EN
is displayed on the
button 0 until the
flashes on the outdoor
flashes on the time
AFT 77 A1
08.03.19 09:3