Related Manuals for Viega Advantix 4937.2
Summary of Contents for Viega Advantix 4937.2
- Page 1 Advantix plug-in drain Instructions for Use for non-sealed floor construction Model Year built: 4937.2 from 01/2010 en_INT...
- Page 2 Advantix plug-in drain 2 from 14...
-
Page 3: Table Of Contents
Table of contents Table of contents About these instructions for use Target groups Labelling of notes About this translated version Product information Standards and regulations Intended use 2.2.1 Areas of use 2.2.2 Media 2.2.3 Drainage capacity Product description 2.3.1 Overview 2.3.2 Technical data Information for use... -
Page 4: About These Instructions For Use
This restriction does not extend to possible operating instructions. The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use. -
Page 5: About This Translated Version
About these instructions for use About this translated version This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e. -
Page 6: Product Information
2 Product information Standards and regulations The following standards and regulations apply to Germany / Europe. National regulations can be found on the relevant web site of your viega.com/standards . country at Regulations from section: Media Scope / Notice Regulations applicable in Ger-... -
Page 7: Product Description
Product information Product description 2.3.1 Overview Fig. 1: Model 4937.2 1 - stainless steel grate 2 - O-ring 3 - odour barrier with 2 shutter valves, frost proof 4 - stainless steel frame 5 - drain casing with multiple lip seal 2.3.2 Technical data Nominal width [DN] (drain... -
Page 8: Information For Use
Product information Information for use 2.4.1 Installation variations The drain is placed into a pipe (nominal width DN 100). The drain itself is integrated into the floor at the height of the grate. Fig. 2: Mounting example Advantix plug-in drain 8 from 14... -
Page 9: Handling
Handling 3 Handling Assembly information 3.1.1 Important note Before assembly: Check if the drainage capacity of the drain is sufficient for the arising Ä Chapter 2.2.3 „Drainage capacity“ on page 6 . water volume Check if the installation height of the drain corresponds with the planned floor construction. -
Page 10: Assembly
Handling Fig. 5: Maximum installation height Assembly 3.2.1 Connecting the drain Mounting the drain Coat lip seal with lubricant and push the drain into the drainpipe. At least 3 sealing lips should seal the drain in the pipe. INFO! If the drain is used in a pipe with a coupling, the sealing lips cannot seal inside the coupling. - Page 11 Handling Apply protective sticker. Lay tiles. Close the gap between grate and tiles with silicone. Remove protective sticker. Advantix plug-in drain 11 from 14...
-
Page 12: Care
Handling Remove stainless steel grate. Insert odour trap. Insert stainless steel grate. Care 3.3.1 Care tips Normal soap or a mild cleaning agent can be used for regular care and prevention of lime scale on the grate and frame. Under no circum- stances should scouring agent or scratching objects be used. -
Page 13: Cleaning The Drain
Handling 3.3.2 Cleaning the drain We recommend using a mild cleaning agent and a washing-up brush for cleaning. Remove and clean grate. Remove and clean odour trap. Clean drain. Replace odour trap. Re-insert grate. Advantix plug-in drain 13 from 14... -
Page 14: Disposal
Handling Disposal Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements. Advantix plug-in drain 14 from 14...