Proper Use And Cleaning; Cleaning Suggestions; Returning A Signal Generator To Keysight Technologies - Keysight Technologies X Series Getting Started Manual

Getting Started

Proper Use and Cleaning

Proper Use and Cleaning

The signal generator cover protects against physical contact with internal
assemblies that contain hazardous voltages, but does not protect internal
assemblies against contact with liquids. To avoid damage and personal injury,
ensure that liquids are positioned away from the signal generator.
Personal injury may result if the signal generator is not used as specified.
Unspecified use impairs the protection provided by the equipment. The signal
generator must be used with all means for protection intact.

Cleaning Suggestions

To prevent electrical shock, disconnect the instrument from mains before
cleaning. Use a dry cloth or one slightly dampened with water to clean the
external case parts. Do not attempt to clean internally.
Cleaning connectors with alcohol shall only be done with the instruments power
cord removed, and in a well-ventilated room. Allow all residual alcohol moisture
to evaporate, and the fumes to dissipate prior to energizing the instrument.
To ensure good connections, regularly clean the instrument's front and rear
panel connectors with alcohol.
To prevent dust build-up that could potentially obstruct ventilation,
periodically clean the instrument's cover. Use a dry cloth or a cloth slightly
dampened with water to clean the external case parts.

Returning a Signal Generator to Keysight Technologies

1. Gather as much information as possible about the signal generator's
2. Contact Keysight using the phone number that is specific to your
3. Ship the signal generator in the original factory packaging materials, if
Keysight X-Series Signal Generators Getting Started Guide
problem.
geographic location. These phone numbers are listed on the Internet at
http://www.keysight.com/find/assist. If you do not have access to the
Internet, contact your Keysight field engineer.
After you provide information about the signal generator and its condition,
you will receive information about where to ship your signal generator for
repair.
available, or use similar packaging to properly protect the signal
generator.
17