Power And Lead Connections - Atmel megaAVR Getting Started

Programming Using the Board
7.3 Power and Lead
Connections
7-2
The 10-way programming lead is inserted in the box header—the key-way ensures cor-
rect orientation. The computer connections are shown in "Connecting the System" on
page 3-1.
The power supply 9-15V DC or 7-12V AC is plugged into the power connector 5.5/2.1
Barrel.
The Power On/Off switch is located next to the power connector. Insert the device
adapter before switching the power on. The power on LED should light when the power
is correctly applied.
Your hardware is now ready for programming. Refer to "How to Use the Software" on
page 6-1 for details of programming operations. A programming LED indicates program-
ming is happening.
megaAVR™ Starter Kit Manual