Biomark IS1001 User Manual page 7

4. In the Serial Port box, make sure that COMx is selected (where x is the port number assigned
to the computer's RS-232 port or to USB port that has USB-to-Serial adapter connected to).
5. In the Baud Rate box, make sure 115200 is specified.
6. Make a serial port connection to the BLE Data Logger by clicking on the Open button.
7. To verify the connection between the computer and the BLE Data Logger, within BioTerm
Traffic window type ? and then press Enter. A list of logger's available commands should be
displayed.
8. To save the downloaded data in a text file, configure the BioTerm utility program to act as a
data logger by selecting Tools > Enable Capture or by clicking on the Capture On/Off button.
9. Type the MED command and then press Enter to download the entire content of the memory.
Note: The downloaded data will have a * symbol at the beginning of each line.
IS1001 BLE Data Logger User Manual
Collecting Data from BLE Data Logger
4