Biomark IS1001 User Manual page 10

Collecting Data from BLE Data Logger
4. To verify the connection between the computer and the BLE Data Logger, within BioTerm
Traffic window type RFS command and then press Enter. The logger's status report should
be displayed next. Verify that that the connection is established with the intended device.
5. To save the downloaded data in a text file, configure the BioTerm utility program to act as a
data logger by selecting Tools > Enable Capture or by clicking on the Capture On/Off button.
6. Type the MED command and then press Enter to download the entire content of the memory.
Note: The downloaded data will have a * symbol at the beginning of each line.
7 IS1001 BLE Data Logger User Manual