Biomark IS1001 User Manual page 5

▪ Flashing four times – serial number has not been assigned. Bootloader is waiting
for a serial number to be assigned via RS-232 port. Cannot proceed to Bluetooth
initialization without a serial number assigned.
▪ Flashing five times – unable to initialize Bluetooth module.
•
Serial Number: Used to identify each specific BLE Data Logger.
•
RS-232 Port: This port has two purposes:
o Can be used to connect the BLE Data Logger to a local or remote computer to
download the data that is stored in its internal flash memory or to collect the received
tag IDs transmitted in real-time.
o Can be configured to act as a communication port of the attached IS1001, RM310 or
FS1001A reader. This enables monitoring and configuring of the reader from either a
local or remote computer.
By default, the RS-232 port is set as the BLE Data Logger communication port.
•
Bluetooth Module: Enables Bluetooth wireless connection with the BLE Data Logger.
This connection has the same purposes and operates the same way as the RS-232 port.
•
Bluetooth Status LEDs: Indicate the status of the Bluetooth connection.
o Blue "LINK" LED:
▪ Flashing slowly – ready to connect.
▪ Steady on – connection established.
▪ Flashing rapidly – data being transmitted or received.
o Yellow "BT_STATUS" LED:
▪ Flashing once – ready to connect.
▪ Flashing twice – connection established.
▪ Steady on – configuration mode (CPU enters this mode for a short time after
restart).
•
IS1001 Status LEDs and Beeper: Indicate operational status of the attached IS1001
reader (not applicable when BLE Data Logger is attached to an RM310 or FS1001A
reader).
IS1001 BLE Data Logger User Manual
BLE Data Logger Description
2