Biomark IS1001 User Manual page 2

Copyright and Trademarks
© Copyright 2019 Biomark, Inc. All rights reserved. This manual contains valuable proprietary
information. It should not be published, copied, or communicated to any person without prior
IS1001, IS1001-12V, RM310, FS1001A and BioTerm are trademarks of Biomark, Inc.
All other trademarks, trade names, or images mentioned herein belong to their respective
Release Date
July, 2016
February, 2017
August, 2017
May, 2018
June, 2019
READ THROUGH THIS ENTIRE MANUAL BEFORE INSTALLING AND OPERATING IS1001
BLE DATA LOGGER. FOLLOW ALL STEPS EXACTLY. USING THE IS1001 BLE DATA
LOGGER IN A MANNER FOR WHICH IT WAS NOT DESIGNED MAY IMPAIR THE SAFETY
FEATURES BUILT IN BY THE MANUFACTURER.
IS1001 BLE Data Logger User Manual
Copyright
authorization from Biomark, Inc.
Trademarks
Document History
Doc Revision Firmware Version
1 1.1.1
2 1.3.0
3 1.4.0
4 1.6.0
5 1.7.0
owners.
Original release of this manual.
Revised BLE Data Logger Commands and
Updating Attached Reader Firmware sections;
added ASCII Protocol and Message Types and
Formats sections.
Updated the pictures and description to match
BLE Data Logger PCB Rev. A.
Added RM310 Reader Idling Time command.
Added support for FS1001A Transceiver and
RAT command to set attached reader type.
Added RSD command to periodically request
status report from FS1001A.
Updated logger's memory capacity. Added
Unique Mode and Unique Delay options for
RM310 reader. Added option not to store Virtual
Test Tag IDs received from IS1001 or FS1001A
reader. Added Local Communication Port
Transfer Rate setting. Added command to reset
logger's parameters to default values.
Comments
ii