5.2 Target Detection
In live view mode, the target detection function can achieve smart detection, facial detection,
vehicle detection, and human body detection during the last 5 seconds and the following 10
seconds.
Step 1 In live view mode, click Target Detection to enter the target detection interface.
Step 2 Check the checkbox to select different detection types: smart detection (
(
), face detection (
Step 3 Select the historical analysis (
detection results are displayed in the list.
Step 4 (Optional) Click a result in list to play the related video.
5.3 Configure Live View Settings
Live View settings can be customized according to different needs. You can configure the output
interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.
Step 1 Go to System > Live View > General.
Step 2 Configure the live view parameters.
Video Output Interface: Select the video output to configure.
●
Live View Mode: Select the display mode for live view.
●
Dwell Time: The time in seconds to dwell between switching of cameras when enabling
●
auto-switch in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
●
Network Video Recorder User Manual
), and human body detection (
) or real-time analysis (
Figure 5-3 Live View-General
65
), vehicle detection
).
) to obtain the results. The