The camera connection will be disabled when the device works in the hot spare mode.
●
It is highly recommended to restore the defaults of the device after switching the working
●
mode of the hot spare device to normal mode to ensure the normal operation afterwards.
17.3 Set Working Device
Step 1 Go to System > Hot Spare.
Step 2 Set the Work Mode as Normal Mode.
Step 3 Check Enable.
Step 4 Enter the IP address and admin password of hot spare device.
Step 5 Click Apply.
17.4 Manage Hot Spare System
Step 1 Go to System > Hot Spare in hot spare device.
Step 2 Check working devices from the device list and click Add to link the working device to the hot
spare device.
A hot spare device can connect up to 32 working devices.
Network Video Recorder User Manual
Figure 17-3 Hot Spare
182