Region Entrance Detection - HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual

2) Draw an area in preview window.
3) Click Stop Drawing.
Step 9 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 10 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Step 11 Click Apply.

12.5 Region Entrance Detection

Purpose:
Region entrance detection function detects objects that enter a pre-defined virtual region from the
outside place.
Step 1 Go to System Management > Event Settings > Smart Event.
Step 2 Select a Camera to configure.
Step 3 Click Region Entrance Detection.
Step 4 Check Enable Region Entrance Detection.
Step 5 (Optional) Check Save VCA Picture to save the captured pictures of region entrance
detection.
Step 6 Select Target of Interest as Human Body or Vehicle to discard region entrance pictures and
video files which are not triggered by human body or vehicle.
Network Video Recorder User Manual
Figure 12-5 Region Entrance Detection
144