Configure Unlock Pattern For Login - HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual


After the device is activated, you should properly keep the password.
●
You can duplicate the password to the IP cameras that are connected with default protocol.
●

2.3 Configure Unlock Pattern for Login

For the admin user, you can configure the unlock pattern for device login.
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.
Step 2 Use the mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.

Connect at least 4 dots to draw the pattern.
●
Each dot can be connected for once only.
●
Step 3 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.

If the two patterns are different, you must set the pattern again.
Network Video Recorder User Manual
Figure 2-2 Draw the Pattern
44