Emerson Rosemount 5408 Quick Start Manual page 28

Quick Start Guide
9. Attach and tighten the cover.
28
a) Verify the cover jam screw is completely threaded into the
housing.
b) Attach and tighten the cover.
Make sure the cover is fully engaged. There should be no
gap between the cover and the housing.
c) Turn the jam screw counterclockwise until it contacts the
cover.
Required for explosion-proof/flameproof installations
only.
Rosemount 5408 and 5408:SIS Level Transmitters
June 2019
H2.5 mm