Quick Start Guide
Postrequisites
Align the transmitter head (see
3.3.2
Flanged tank connection
Prerequisites
If applicable, assemble the segmented cone antenna (see
segmented cone
Procedure
1. Place a suitable gasket on the tank flange.
2. Place the customer supplied flange over the gasket.
3. Tighten the bolts and nuts with sufficient torque for the flange and
gasket choice.
4. Apply anti-seize paste or PTFE tape on threads according to your site
procedures.
BSPP (G) threads.
10
antenna).
Gasket may be used as a sealant for adapters with 1½- or 2-in.
Align transmitter
Rosemount 5408 and 5408:SIS Level Transmitters
head).
Assemble the
June 2019