Furuno MU-190 Operator's Manual page 22

2. ADJUSTMENTS
1. Press the or
menu. The menu item and setting currently selected (the cursor) is shown in orange.
2. Press the or
3. After you adjust all settings, press the
message appears.
INSTALLATION SETTING
4. Press the key. The settings are saved and the menu is closed.
Note: To cancel the settings, press the
you can move the cursor to the menu items with the
Menu item
[EXT BRILL CTRL] Adjust the brilliance of the monitor unit from the external
[SERIAL
BAUDRATE]
[COLOR
CALIBRATION]
[KEY LOCK]
[SAVE AND EXIT]
key to select the menu item to adjust on the [INSTALLATION SETTING]
key to change the setting.
EXT BRILL CTRL RS-485
SERIAL BAUDRATE 4800bps
COLOR CALIBRATION ON
KEY LOCK ON
SAVE AND EXIT YES
Save configuration changes and exit now? YES[ ] NO[ ]
[INSTALLATION SETTING] menu descriptions
equipment.
[OFF]: You can not adjust the brilliance from the external
equipment. You can adjust the brilliance with the
BRILL key.
[DVI1]: When the DVI1 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D1 port. For the screen other than the DVI1,
you can adjust the brilliance with the
[DVI2]: When the DVI2 signal is shown, you can adjust
the brilliance of this display from the equipment connect-
ed to DVI-D2 port. For the screen other than the DVI2,
you can adjust the brilliance with the /BRILL key.
[RS-232C]:You can adjust the brilliance from the equip-
ment connected to RS-232C port.
[RS-485]: You can adjust the brilliance from the equip-
ment connected to RS-485 port.
[USB]: No use.
Select the serial baud rate according to the equipment
connected.
Note: This function is available when you set [EXT
BRILL CTRL] to [RS-232C] or [RS-485].
Select whether to use color-adjusted correction data or
not.
[OFF]: Do not use the adjusted data.
[ON]: Use the adjusted data.
Select whether to lock the key operation or not (see
paragraph 3.2.2).
[OFF]: Do not lock the key operation.
[ON]: Lock the key operation.
Select whether to save the settings or not.
[NO]: Cancel the settings.
[YES]: Save the settings.
key to select [SAVE AND EXIT]. The confirmation
(OFF/DVI1/DVI2/RS-232C/RS-485/USB)
(4800/9600/19200/38400)
(OFF/ON)
(OFF/ON)
(NO/YES)
key. The indication changes from [YES] to [NO] and
key.
Function
/BRILL key.
13
Setting
[OFF], [DVI1],
[DVI2], [RS-232C],
[RS-485], [USB]
/
[4800bps],
[9600bps],
[19200bps],
[38400bps]
[OFF], [ON]
[OFF], [ON]
[NO], [YES]