Solid-State Drive - HP ENVY x360 13 Maintenance And Service Manual

5. Remove the battery (5).
Reverse this procedure to install the battery.

Solid-state drive

Description
1-TB, PCIe, NVMe, solid-state drive with TLC
1-TB, PCIe, NVMe, solid-state drive
512-GB, PCIe, NVMe, solid-state drive with TLC
512-GB, PCIe, NVMe, solid-state drive
256-GB, PCIe, NVMe, solid-state drive with TLC
256-GB, PCIe, NVMe, solid-state drive
128-GB, M.2, SATA-3 solid-state drive with TLC
Solid-state drive shield
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
30 Chapter 5 Removal and replacement procedures
Bottom cover on page 28).
Battery on page 29).
Spare part number
L53446-001
L53442-001
L53445-001
L53448-001
L53444-001
L53447-001
L53443-001
L53436-001