Display Assembly - HP ENVY x360 13 Maintenance And Service Manual

Display assembly

Description
In ceramic white finish:
13.3-inch, FHD, AntiGlare, UWVA, TouchScreen display assembly with privacy filter
13.3-inch, UHD, BrightView, UWVA, TouchScreen display assembly
13.3-inch, FHD, BrightView, UWVA, TouchScreen display assembly with LP
13.3-inch, FHD, BrightView, UWVA, TouchScreen display assembly
In nightfall black finish:
13.3-inch, FHD, AntiGlare, UWVA, TouchScreen display assembly with privacy filter
13.3-inch, UHD, BrightView, UWVA, TouchScreen display assembly
13.3-inch, FHD, BrightView, UWVA, TouchScreen display assembly with LP
13.3-inch, FHD, BrightView, UWVA, TouchScreen display assembly
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the display assembly:
1. Disconnect the WLAN antenna cables (1) from the WLAN module.
NOTE:
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
2. Release the ZIF connector (2) to which the webcam/microphone module cable is connected, and then
disconnect the webcam/microphone module cable from the system board.
3. Release the ZIF connector (3) to which the display panel cable is connected, and then disconnect the
display panel cable from the system board.
Bottom cover on page
Battery on page
The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
28).
29).
Spare part number
L57886-001
L57889-001
L57887-001
L57888-001
L53430-001
L53433-001
L53431-001
L53432-001
Component replacement procedures 49