Switching Off The Pedelec; Display Of The Battery Charge Level; Display Of The Assistance Mode - Derby cycle Pedelec Groove Next User Manual

Epac electrically power assisted cycle
Table of Contents

Advertisement

5.3.2
Switching off the Pedelec
1. Press the
button on the display element for one second.
The Pedelec Groove Next will switch off.
If the Pedelec remains stationary for about 10 minutes, it
switches off itself.
5.3.3

Display of the battery charge level

Display
Description
Four LEDs light up

Three LEDs light up

Two LEDs light up


One LED lights up

One LED flashes

5.3.4

Display of the assistance mode

1. To change the support mode, press the
button briefly.
2. Keep pressing the
button until the desired support mode is
displayed.
Battery charge level
76 – 100 %
51 – 75 %
26 – 50 %
11 – 25 %
0 – 10 %
Display
Assistance
POWER: Assistance function is

working with a high power.
SPORT: Assistance is working

with a medium power.

ECO: Assistance is working

with a low power.
OFF: No assistance

3. Assistance for the selected mode starts working as soon as you start
pedalling. Assistance cuts out as soon as you stop pedalling or when
you have reached a speed of 20 mph.
There is no drive support during charging.
Original User Guide | Pedelec Groove Next Version 1
Power consumption
High
Centre
Low
Very low
US-45

Advertisement

Table of Contents
loading

Table of Contents