Kramer Protocol 3000 Syntax; Protocol 3000 Commands - Kramer VP-445 User Manual

Kramer Protocol 3000 Syntax

The Kramer Protocol 3000 syntax uses the following delimiters:
•
CR = Carriage return (ASCII 13 = 0x0D)
•
LF = Line feed (ASCII 10 = 0x0A)
•
SP = Space (ASCII 32 = 0x20)
Some commands have short name syntax in addition to long name syntax to enable faster
typing. The response is always in long syntax.
The Protocol 3000 syntax is in the following format:
•
Host Message Format:
Start Address (optional)
# Device_id@
•
Simple Command – Command string with only one command without addressing:
Start Body
# Command SP Parameter_1,Parameter_2,...
•
Command String – Formal syntax with command concatenation and addressing:
Start Address
# Device_id@
•
Device Message Format:
Start Address (optional)
~ Device_id@
•
Device Long Response – Echoing command:
Start Address (optional)
~ Device_id@

Protocol 3000 Commands

This section includes the following commands:
•
System Commands (see
•
Switching/Routing Commands (see
•
Video Commands (see
•
Audio Commands (see
•
Communication Commands (see
VP-445 – The RS-232/Ethernet (TCP) Communication Protocol
Body Delimiter
CR
Message
Body
Command_1 Parameter1_1,Parameter1_2,...|
Command_2 Parameter2_1,Parameter2_2,...|
Command_3 Parameter3_1,Parameter3_2,...|...
Body Delimiter
CR LF
Message
Body
Command SP [Param1,Param2 ...] result
System Commands
MENU-CMD
Audio Commands
Communication Commands
Delimiter
CR
on page 34)
Switching/Routing Commands
on page 40)
on page 44)
Kramer Electronics Ltd.
Delimiter
CR
Delimiter
CR LF
on page 40)
on page 53)
33