Protocol 3000; Kramer Protocol 3000 Syntax - Kramer VM-214DT User Manual

Protocol 3000

The can be operated using serial commands from a PC, remote controller or touch screen
using the Kramer Protocol 3000.
This section describes:
•
Kramer Protocol 3000 syntax (see
•
Kramer Protocol 3000 commands (see

Kramer Protocol 3000 Syntax

Host Message Format
Start Address (optional)
# Device_id@
Simple Command
Command string with only one command without addressing:
Start Body
Command SP Parameter_1,Parameter_2,...
#
Command String
Formal syntax with commands concatenation and addressing:
Start Address
# Device_id@
Device Message Format
Start Address (optional)
~ Device_id@
Device Long Response
Echoing command:
Start Address (optional)
~ Device_id@
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
SP = Space (ASCII 32 = 0x20)
VM-214DT – Protocol 3000
Kramer Protocol 3000 Syntax
Kramer Protocol 3000 Commands
Body
Message
Body
Command_1 Parameter1_1,Parameter1_2,...|
Command_2 Parameter2_1,Parameter2_2,...|
Command_3 Parameter3_1,Parameter3_2,...|...
Body
Message
Body
Command SP [Param1 ,Param2 ...] result
Kramer Electronics Ltd.
on page 32)
on page 35)
Delimiter
CR
Delimiter
CR
Delimiter
CR
Delimiter
CR LF
Delimiter
CR LF
32