Protocol 3000; Kramer Protocol 3000 Syntax - Kramer WP-5VH2 User Manual

13

Protocol 3000

The WP-5VH2 can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes:
 Kramer Protocol 3000 syntax (see
 Kramer Protocol 3000 commands (see
13.1

Kramer Protocol 3000 Syntax

13.1.1 Host Message Format
Start Address (optional)
#
Destination_id@
13.1.1.1 Simple Command
Command string with only one command without addressing:
Start
#
13.1.1.2 Command String
Formal syntax with commands concatenation and addressing:
Start Address
# Destination_id@
13.1.2 Device Message Format
Start Address (optional)
~
Sender_id@
13.1.2.1 Device Long Response
Echoing command:
Start Address (optional)
~
Sender_id@
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
WP-5VH2 - Protocol 3000
Body
Message
Body
Command SP Parameter_1,Parameter_2,...
Body
Command_1 Parameter1_1,Parameter1_2,...|
Command_2 Parameter2_1,Parameter2_2,...|
Command_3
Parameter3_1,Parameter3_2,...|...
Body
Message
Body
Command SP [Param1 ,Param2 ...] result
Section 13.1)
Section 13.2)
Delimiter
CR
Delimiter
CR
Delimiter
CR
delimiter
CR LF
Delimiter
CR LF
39