Kramer Protocol 3000 Syntax
The Kramer Protocol 3000 syntax uses the following delimiters:
•
CR = Carriage return (ASCII 13 = 0x0D)
•
LF = Line feed (ASCII 10 = 0x0A)
•
SP = Space (ASCII 32 = 0x20)
Some commands have short name syntax in addition to long name syntax to enable faster
typing. The response is always in long syntax.
The Protocol 3000 syntax is in the following format:
•
Host Message Format:
Start Address (optional) Body
#
•
Simple Command – Command string with only one command without addressing:
Start
#
•
Command String – Formal syntax with command concatenation and addressing:
Start Address
#
•
Device Message Format:
Start Address (optional)
~
Device_id@
•
Device Long Response – Echoing command:
Start Address (optional)
~
Device_id@
VS-622DT – Protocol 3000
Device_id@
Body
Command ␠
Parameter_1,Parameter_2,...
Body
Device_id@ Command_1
Parameter1_1,Parameter1_2,...|
Command_2
Parameter2_1,Parameter2_2,...|
Command_3
Parameter3_1,Parameter3_2,...|...
Body
Message
Body
Command ␠ [Param1 ,Param2 ...] result
Message
Kramer Electronics Ltd.
Delimiter
␍
Delimiter
␍
Delimiter
␍
Delimiter
␍␊
Delimiter
␍␊
54