Performance Verification
Figure 6: Equipment connections for verifying the genlock function
68
6. Set the TV signal generator (AGL7 module) settings as follows:
Control
Signal format
Test signal
7. Set the waveform vector monitor settings as follows:
Control
CONFIG
DISPLAY
INPUT
OVERLAY
EXT REF
8. Press the GAIN menu button on the waveform vector monitor front panel to
display the Gain menu.
9. In the Gain menu, select X5 and VARIABLE.
10. Align the PAL burst vector with the compass rose of the display.
TG700 TV Signal Generator Platform Specifications and Performance Verification
Setting
PAL
Black Burst
Setting
REFERENCE
NTSC EXTREF: A
PAL EXTREF :B
VECTOR
CH-A and CH-B
ON
OFF