Tektronix TG700 Technical Reference page 148

Performance Verification
132
12. Verify that the correct color bar and overlay circle are displayed on the SDI
Picture display.
13. Press the Measure button on the video measurement set to open the Measure
mode display.
14. In the Measure mode display, touch the SDI Audio Format Analyzer
application.
15. Verify that no CRC error appears on the SDI Audio Format Analyzer display.
16. Move the BNC cable from the SIGNAL 1 connector to the SIGNAL 2
connector on the DVG7 Generator module.
17. Press the Measure button on the video measurement set to open the Measure
mode display.
18. Repeat steps 9 through 15.
Serial Digital Black Outputs (Option BK Only). This test verifies that serial digital
black signals are output correctly from the BLACK1 and BLACK 2 connectors.
19. Move the BNC cable from the SIGNAL 2 connector to the BLACK 1
connector on the DVG7 Generator module.
20. Select the 40% Flat Field signal as follows:
a. Press the CANCEL button to return to the module main menu.
b. Press the up (▲) or down (▼) arrow button to select BLACK (OPTION).
c. Press ENTER to access the BLACK submenu.
d. Press the up (▲) or down (▼) arrow button to select SIGNAL.
e. Press the left (◄) or right (►) arrow button to select 40% Flat Field
and press ENTER.
21. Turn on the embedded audio for Group 1 as follows:
a. Press the CANCEL button to return the BLACK submenu.
b. Press the up (▲) or down (▼) arrow button to select AUDIO
(EMBEDDED).
c. Press ENTER to access the AUDIO GROUP submenu for Group 1.
d. Press the left (◄) or right (►) arrow button to select Group 1, and then
press ENTER to access the AUDIO GROUP submenu.
e. Press the left (◄) or right (►) arrow button to select Enable, and then
press ENTER.
f. Press the CANCEL button to return the BLACK submenu.
22. Press the Measure button on the video measurement set to open the Measure
mode display.
TG700 TV Signal Generator Platform Specifications and Performance Verification