Advertisement
Activation Assistant
If your device is not activated, use the Activation Assistant:
1
From the Extras item on the Watcher menu, choose Activation.
The Activation Assistant window is displayed.
2
Ensure you have the items listed in the Activation Assistant window, and phone your
service provider. Inform them that you are activating a Sierra Wireless wireless device.
Click Next.
3
Follow the instructions of your service provider to activate your device. Write down this
information that your service provider gives you (depending on your service provider,
some of the following items may not apply):
Activation code (MSL): _________________________________________________
Phone number (MDN): _________________________________________________
MSID / IMSI_S (if not the same value as your MDN [above]): _____________________
4
To complete the activation process, enter the information (that you wrote down) into the
fields on the screen, and go through the rest of the Activation Assistant.
After your service provider sets up your account on the network, your device is
activated.
5
If a window appears, prompting you to enter your password, enter your Mac password,
and then click OK.
10
2131300 - AirCard 402 QSG, no GPS - Mac, and Windows Watcher Contemporary Theme.indd 6
6
If the "New Port Configuration window" appears, click Continue to automatically
configure your computer to use your device.
You can now connect to your service provider's network.
Connecting to the network
To connect to the network:
u In Watcher, click Connect.
Once you're connected to the network, Watcher shows the amount of time you've been
connected, and the amount of data received (Rx) and transmitted (Tx).
To end your network connection:
u In Watcher, click Disconnect.
Need more information?
For more information, see the User Guide (installed as a PDF on your Mac desktop).
11
01/09/2009 11:42:42
Advertisement
