Installing The Filters - Winix ZERO+ User Manual

INSTALLING THE FILTERS

This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
Operating the unit without removing the plastic wrap may result in product failure.
Unplug and make sure the unit is turned off before installing filters.
The unit will automatically power off when front panel is opened.
Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Remove the filters from the unit, they are
protected inside a plastic wrap.
Remove filters from protective plastic wrap.
Operating the unit without removing
filters from plastic may cause abnormal
noise, deformation, or fire as a result of
overheating.
Refer to pages 15 - 18 for detailed information on filter care
Note
and how to replace them.
English
Latch
ZERO+ WiFi