Winix ZERO+ User Manual page 16

FILTER CARE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
The unit will automatically power off when front panel is opened.
Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Press the tabs on the top edge to remove
the 1 Pre-filter.
First remove the 2 CD Carbon filter and
then the 3 True HEPA filter with Cleancel™
by pulling on the numbered tags at the top
of each filter.
For optimal performance, only genuine Winix filters should
NOTICE
be used with this unit.
English
Latch
Tabs
ZERO+ WiFi