Manual Mode, Timer And Plasmawave - Winix ZERO+ User Manual

MANUAL MODE, TIMER AND PLASMAWAVE

Every time the Mode button is pressed, the Mode LED light will cycle through the
settings. (Auto, Sleep, Low, Medium, High, Turbo)
3. Manual Mode (setting fan speed)
Users can opt to manually set the fan speed to Low, Medium, High or Turbo.
Press the Mode button to select the desired
fan speed.
The mode LED light will indicate the
selected fan speed, and operation will
begin.
When Manual Mode is in use, Auto and Sleep modes are
Note
automatically disabled.
4. Timer
The timer can be set for when you want the unit to run for a specified period of time.
Select the desired period by pressing the
Timer button.
The Timer LED light will indicate the
selected length of operation.
Every time the Timer button is pressed
the Timer LED light will cycle through
the settings.
(1hr, 4hr, 8hr, [NO TIMER]).
The WINIX SMART app will display how much time is
Note
remaining on the timer.
5. PlasmaWave
By default, PlasmaWave is enabled whenever the unit is powered on.
Press the Plasma button when the power is
on to enable or disable this feature.
English ZERO+ WiFi