Page 1
User Manual WINIX AIR PURIFIER ZERO Pro (AZPU370-IWB) Model ˍ Please read and follow all safety rules and instructions Use & Care in this manual before operating. Guide ˍ The product warranty is printed on the back of this guide, so please keep it in a safe place for future use.
FILTER CARE · · ························································· 13 PARTICLE SENSOR CARE · · ·············································· 17 CLEANING CARE ······················································· 18 FREQUENTLY ASKED QUESTIONS ······································· 19 UNIT SPECIFICATIONS · · ················································ 21 PRODUCT WARRANTY ················································· 22 ▶ This product is suitable for 220 ~ 240 V only. English ZERO Pro...
WINIX AIR PURIFIER WINIX AIR PURIFIER Model ZERO+ WiFi (AZPU373-HWB) Model ZERO Pro (AZPU370-IWB) Please read and follow all safety rules and instructions ● Use & Care in this manual before operating. Please read and follow all safety rules and instructions Guide Use &...
Air Quality Every time the Mode button is light. LED light indicates pressed, the Mode LED light will when it is time to cycle through the settings. (Auto, change the lter. Sleep, Low, Medium, High, Turbo) English ZERO Pro...
(aerosols, fuel, gases etc.). Do not place in excessively humid areas Do not place below any electrical outlet. where unit may become wet. ※ This unit is not intended to be used to preserve documents or in art conservation. English ZERO Pro...
ˍ Operating the unit without removing filters from plastic may cause abnormal noise, deformation, or fire as a result of overheating. ˍ Refer to pages 15 - 18 for detailed information on filter care NOTE and how to replace them. English ZERO Pro...
Page 7
※ Intervals between filter replacement may vary depending on environment. ※ For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of other filters. FILTER This unit is compatible with filter ITEM: 1712-0093-01 English ZERO Pro...
ˍ When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles passing through ® PlasmaWave , it is normal and does not signify product failure. To disable PlasmaWave ® , see page 11. English ZERO Pro...
ˍ When Sleep mode is selected, the fan speed is automatically NOTE set to Low. Fan speed can be changed by pressing the Fan Speed (Mode) Button. ˍ When Sleep Mode is enabled, the Air Quality light is disabled. English ZERO Pro...
ˍ Every time the Timer button is pressed the Timer LED light will cycle through the settings. (1hr, 4hr, 8hr, [NO TIMER]). ˍ The WINIX SMART app will display how much time is NOTE remaining on the timer. 5. PlasmaWave ®...
ˍ When Auto Mode is enabled the Air Quality LED light may or NOTE may not be on, depending on the amount of ambient light in the room. ˍ When Sleep Mode is activated, the Air Quality Indicator light is turned off. English ZERO Pro...
True HEPA filter Can NOT be with Cleancel™ WASHED ※ Intervals between filter replacement may vary depending on environment. ※ For optimal use, Pre-filter can be cleaned every 14 days which can extend the life of other filters. English ZERO Pro...
Page 14
AOC™ Carbon Filter ③ and then the True HEPA filter with Cleancel™ by pulling on the numbered tags at the top of each filter. ˍ For optimal performance, only genuine Winix filters should NOTICE be used with this unit. English ZERO Pro...
Page 15
After replacing the filters, turn the power ④ back on and then use a thin object, such as a paper clip, to press the RESET switch for 5 seconds. English ZERO Pro...
Page 16
ˍ The Pre-filter is reusable after cleaning. ˍ Do not use hot water over 104°F or volatile fluids such as paint thinner. ˍ After washing the pre-filter, allow it to dry completely in a wellventilated area. Otherwise, it may develop a bad odor. English ZERO Pro...
Do not use volatile substances such as alcohol or acetone. Cotton swab Wipe away any remaining moisture with a ③ dry cotton swab. Close the Particle Sensor cover. ④ ˍ The Particle Sensor cover may be cleaned using a vacuum cleaner. English ZERO Pro...
ˍ Never disassemble, repair or modify this unit yourself. ˍ Do not use flammable sprays or liquid detergents. ˍ Do not allow children to clean or maintain the unit ˍ Before cleaning or maintaining, ensure unit is off and unplugged. English ZERO Pro...
- Clear the sensor using a vacuum cleaner. view page 19. It vibrates and makes a lot of noise. ˍ Is it running on a slanted surface? - Move the unit to a hard, flat area of the floor. English ZERO Pro...
Page 20
- Contact customer service to confirm the exact cause. - Replace the AOC™ Carbon filter and True HEPA filter with Cleancel™. The product is not purifying the air enough. ˍ Is the Check Filter indicator light on? - Replace the filters as required. English ZERO Pro...
UNIT SPECIFICATIONS Model Name ZERO Pro (AZPU370-IWB) Power Voltage AC220 - 240V, 50 / 60Hz Power Rate 90 W Max Room Capacity 120 m Dimensions 415 mm(W) x 245 mm(D) x 600 mm(H) Weight 8.5 kg Replacement Filter Filter T / item : 1712-0093-01...
The warranty must be presented upon bringing the product for service. Store the warranty in a safe place, as it cannot be reissued. This warranty is valid only in the Europe. Air Purifier Product Name ZERO Pro Model Name Purchase Date Two (2) Years Warranty period...
Need help?
Do you have a question about the ZERO Pro and is the answer not in the manual?
Questions and answers