After displaying FP the AK-4 Pro reboots indicating successful programming by displaying
the initial setting and Viewing Instrument Selections.
Notes:
1. For Universal Mode 1/2 to work, connect the AK-4 Pro SE
multitimbral sequencer/Synthesizer/Keyboard Midi-In and Midi-Out or USB MIDI Out.
(see figure 1 and 2 )
2. Your keyboard must support Fine Tuning Midi data (for Mode 1) or Pitch Bend Midi
Data (for Mode 2).
3. Set Keyboard to Local control off.(see Figure 1)
4. Set Pitch Bend Range to 2 for Mode 2.
5. You may further adjust the pitch of each note in the octave (C to B) to -64/+63 cents by
programming your own User Scales 01-09. User 00 is set to -50 cents "fixed."
AK-4 Pro SE/VERSION 3
www.kelfar.net
Copyright © 2005-19 Kelfar Technologies
to your
MIDI IN/OUT
20