Kelfar Technologies AK4 Pro SE Manual Manual page 41

Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI1) - RESET
BC
Breath Controller is ON for Primary (MIDI1) - TR (+)
4. Press CANCEL to Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH to
12CH, Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
The LED Display shows PCH
5. Press Cancel to setup the Control Change
The LED Display shows CCn
6. Press CANCEL to setup the Control Change.
The LED Display shows Cxx (xx=00 to 119) or UL (Master Volume) i.e C11
Select the Control Change Number by using the Transpose/Adjust buttons.
7. Press CANCEL to setup the Curvature by using the Transpose/Adjust buttons.
The LED Display shows Cux (x=0 to 8)
8. Select the Curve by using the Transpose/Adjust buttons.
9. Press CANCEL to Exit programming the Primary Instrument (MIDI1).
Note: If either the Expression and Breath controller are ON then you will be able to select the MIDI
CHANNELS, CONTROL CHANGE, and CURVATURE. If the Expression or Breath controller are OFF then the
step will be skipped by pressing the CANCEL button to program the Secondary Instrument (MIDI2).
Secondary Instrument
S1
LED Display shows
1. Press D (Yamaha)
LED Display shows
2. Press E (Yamaha TYROS / PSR series)
3. Expression and Breath Controller statues.
The LED Display shows EP or OFF or BC
41
AK-4 Pro SE/VERSION 3
www.kelfar.net
PCH PCH PCH
CCn CCn CCn
S2
Copyright © 2005-19 Kelfar Technologies