Programming The Ak-4 Pro - Korg M3 - Kelfar Technologies AK4 Pro SE Manual Manual

PRESS and HOLD the CANCEL/POWER
Then, while holding down the CANCEL/POWER button, PRESS the TUNE/SETUP button
Primary Instrument
The Display shows P1
1. Press "C"
The Display shows P2
2. Press "G".
The Display shows the midi channel number i.e 0c 1
Notes: Make sure that the AK-4 Pro's midi channel is the same as the Korg M3's midi channel.
Use the Transpose buttons of the AK-4 Pro to select the appropriate midi channel.
3. Press the
CANCEL/POWER
4. Expression and Breath Controller statues.
The LED Display shows EP or OFF or BC
Use the Transpose buttons to Turn ON/OFF:
EP
Expression Pedal is ON - TR (-)
OFF Expression Pedal and Breath Controller are OFF for (MIDI1) - RESET
BC
Breath Controller is ON for Primary (MIDI1) - TR (+)
5. Press CANCEL to Select the MIDI CHANNELS by using the following buttons: (C to B) 1CH to
12CH, Tune/Setup 13CH, TR (-) 14CH, RESET 15CH, TR (+) 16CH.
The LED Display shows PCH
6. Press Cancel to setup the Control Change
The LED Display shows CCn
7. Press CANCEL to setup the Control Change.
The LED Display shows Cxx (xx=00 to 119) or UL (Master Volume) i.e C11
Select the Control Change Number by using the Transpose/Adjust buttons.
8. Press CANCEL to setup the Curvature by using the Transpose/Adjust buttons.
The LED Display shows Cux (x=0 to 8)
9. Select the Curve by using the Transpose/Adjust buttons.
10. Press CANCEL to Exit programming the Primary Instrument (MIDI1).
45
AK-4 Pro SE/VERSION 3
www.kelfar.net

Programming the AK-4 Pro - Korg M3

to confirm
Copyright © 2005-19 Kelfar Technologies