Main Menu Functions - Malaguti Drakon 50 Manual

1
INSTRUMENT AND CONTROL FUNCTION
Starting
Put the key into the ignition switch and turn it to
operations will automatically appear for 3 seconds, after which
the last function used before turning off the vehicle will
appear. The check is automatically performed every time
the key is turned to
contact an authorised MALAGUTI Service Centre.
3
Choosing functions
Functions are divided into menus and sub-menus (bar graph),
which make the display easier to understand.
To select a function, press the MODE button, as shown in the
diagram. The diagram shows you for how long the MODE button
should be held down (near the arrows). To help you identify the
functions and acquire information about their characteristics, a
description is provided here below, indicating the functions in the
order in which they appear on the display.
Menu functions can be seen from every sub-menu.
SPEED
This numeric value is displayed in km/h.
This is the only function that is shown on the display at all times
14
. A check for all
. If the check is not displayed,
Sub-menu functions (Bar
graph)
Speed
Main menu
functions

MAIN MENU FUNCTIONS

A B C
H G
A) TOD FUNCTION
This indicates the total distance travelled;
this value is never reset and remains even
after the vehicle is turned off (the total
distance travelled will be stored for 10 years
running from the last time the vehicle was
used).
B) RPM FUNCTION
This indicates the vehicle's engine speed
in revolutions per minute. This value is also
represented in graphical format by means
of a bar graph (see Sub-menu Functions).
ENGLISH
D E
F