Crankcase; Removal Of The Crankshaft - PEUGEOT XS1P52QMI-4 Workshop Manual

CRANKCASE

CRANKCASE

Removal of the crankshaft

- Remove the primary drive.
- Remove the overrunning clutch.
- Remove the cylinder and the piston.
- Remove the starter motor (2 screws).
Tightening torque: 10 Nm.
- Remove the 2 screws that secure the RH half
casing.
- Remove the RH casing.
- Remove the 2 centring pillars and the paper
gasket.
- Disengage the timing chain from the
crankshaft gear.
- Removing the the cranshaft and conrod
assembly.
- Remove the timing chain and notice its
direction of rotation.
42
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles