Main Functions - ProFlight PFBD302 User Manual

MAIN FUNCTIONS

CONTROLLER FUNCTIONS
SPEED MODE
Press speed to change the flight mode between low speed (Beginner) and high speed
(Advanced).
PHOTO
Press once to take a photo, press and hold to start recording a video.
COMPASS CORRECTION
Press the compass correction button and the drone LED will flash quickly. Pick up the
drone and hold it around 1 meter from the ground and with the base facing the ground.
Turn the drone clockwise 3 times, the controller will emit a sound. Then hold the drone
vertically with the camera facing the ground and turn 3 times clockwise again, the
controller will emit a long sound indicating compass correction has been successful.
GYROSCOPIC CORRECTION
Place the drone on a flat surface. Press the gyroscopic calibration button and the drone
will flash quickly. This indicates that calibration has been successful. You can now
search for GPS signals by pressing the GPS button.
GPS SIGNAL
Indicates the current flight mode and the number of satellites;
When flashing indicates that the GPS signal is insufficient and that the no return, follow,
surround and pointing flight functions are disabled.
When the light is steady it indicates that the current mode is GPS.
POWER
Turn the controller ON/OFF
HEADLESS MODE
The drone can be made to fly in Headless mode by pressing the headless flight button.
This will make the aircraft fly without a front or rear. It will fly in the orientation of the
pilot. It does not matter which direction the drone is facing in headless mode.
ONE BUTTON TAKE OFF/ONE BUTTON LAND
Press once and the aircraft will take off from the ground. Press and hold and the aircraft
will begin descending.
ONE BUTTON RETURN
Press the return button and the controller will emit a sound. The aircraft will return home
regardless of the current direction. Press again to cancel the function.
9