Zoning - Brocade Communications Systems SilkWorm 12000 Design, Deployment And Management Manual

6
SilkWorm 12000 Management Interfaces
Following is a brief description of these features. Refer to the Brocade Web Tools User's Guide v3.0/4.0
(publication number: 53-0000185-01) for additional information.
Note:

Zoning

The Zoning feature allows grouping of devices and/or ports for creating configuration files. When using
this feature, the one major change is how a port is selected on the SilkWorm 12000. To select the
appropriate port, it is now necessary to first select the slot on which the port resides. Notice in Figure 6-
13 that the SilkWorm 12000 contains slots and ports. Brocade recommends that when zoning a
SilkWorm 12000 through Web Tools that it is done while logged into the SilkWorm 12000.
Figure 6-13 Web Tools Zone Administration
6-10
Brocade Web Tools is only available through either of the two logical switch IP addresses. It is
not accessible through either of the two CP card IP addresses.
Publication Number 53-0000251-02