Brocade Communications Systems SilkWorm 12000 Design, Deployment And Management Manual page 73

sw0:admin> nsShow
The Local Name Server has 3 entries {
Type Pid
N
NL
NL
Figure 6-6
passwd: This command allows the password to be changed for user on a switch.
Note:
portCfgTrunkPort : Use this command to add or remove a port from a trunk group. By default on the
SilkWorm 12000 all ports are set to be members of a trunk group for their associated quad. The proper
way of calling this command is portCfgTrunkPort <slot number>/<port number>
[0|1]. Refer to the Brocade ISL Trunking User's Guide (publication number: 53-0000189-01) for
more information.
portDisable: Allows a port to be disabled if enabled. The use of this command has changed slightly.
The syntax is portDisable <slot number>/<port number>.
portEnable: Allows a port to be enabled if disabled. The use of this command has changed slightly. The
syntax is portEnable <slot number>/<port number>.
slotShow: Displays the (CP or port) card type and current status of each slot in the SilkWorm 12000.
Refer to Figure 6-7 for a sample output of slotShow. Pay close attention to the headings in bold, these
are the column headers to the output. Line A in Figure 6-7 can be deciphered as a 16-port card in
physical Slot 2 that is enabled and functioning. Line B in Figure 6-7 can be deciphered as empty in
physical slot 4.
sw12000:admin> slotShow
Slot
---------------------------------
1
2
3
4
5
6
7
8
9
10
Figure 6-7
Publication Number 53-0000251-02
COS PortName
011700; 3;21:00:00:e0:8b:01:98:62;20:00:00:e0:8b:01:98:62; na
Fabric Port Name: 20:17:00:60:69:80:04:b2
011ee8; 3;22:00:00:20:37:d8:d8:53;20:00:00:20:37:d8:d8:53; na
FC4s: FCP [SEAGATE ST318304FC
Fabric Port Name: 20:1e:00:60:69:80:04:b2
011eef; 3;22:00:00:20:37:d8:d6:6c;20:00:00:20:37:d8:d6:6c; na
FC4s: FCP [SEAGATE ST318304FC
Fabric Port Name: 20:1e:00:60:69:80:04:b2
SilkWorm 12000 nsShow Command Output
When using the passwd command, it changes the passwords on both logical switches.
Blade Type ID Status
SW BLADE 2 ENABLED
SW BLADE 2 ENABLED
SW BLADE 2 ENABLED
UNKNOWN VACANT
CP BLADE 1 ENABLED
CP BLADE 1 ENABLED
SW BLADE 2 ENABLED
SW BLADE 2 ENABLED
UNKNOWN VACANT
UNKNOWN VACANT
SlotShow Command Output
SilkWorm 12000 Management Interfaces
NodeName
0005]
0005]
6
TTL(sec)
6-5