Enable Log Updown; Info-Center Channel Name - H3C S7500E Series Command Reference Manual

enable log updown

Use enable log updown to allow a port to generate link up/down logs when the port state changes.
Use undo enable log updown to disable a port from generating link up/down logs upon port state
changes.
Syntax
enable log updown
undo enable log updown
Default
All the ports are allowed to generate port link up/down logs upon port state changes.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, VLAN interface view
Default command level
2: System level
Examples
# Disable port GigabitEthernet1/0/1 from generating link up/down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] undo enable log updown

info-center channel name

Use info-center channel name to name a channel.
Use undo info-center channel to command to restore the default name for a channel.
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
Default
See Table 1 1
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel number in the range of 0 to 9.
channel-name: Specifies a channel name, a case-insensitive string of 1 to 30 characters. It must be a
combination of letters and numbers, and must start with a letter.
Examples
# Name channel 0 as abc.
for details of default channel names and channel numbers.
61