H3C S7500E Series Command Reference Manual page 214

5
6
7
8
9
10
sFlow Port Information:
Interface CID Interval(s) FID MaxHLen
GE1/0/1 1 100
GE1/0/2 2 100
Table 42 Command output
Field
sFlow Version
sFlow Global Information
Agent
Source Address
Collector Information
ID
IP
Port
Aging
Size
VPN-instance
Description
sFlow Port Information
Interface
CID
Interval(s)
FID
MaxHLen
Rate
Mode
Status
6343 0 1400
6343 0 1400
6343 0 1400
6343 0 1400
6343 0 1400
6343 0 1400
Rate
1 128
2 128
Description
sFlow version, which can only take the value of 5.
Global sFlow information.
IP address of the sFlow agent:
•
CLI—Manually configured IP address.
•
Auto—Automatically configured IP address.
Source IP address of sFlow packets.
sFlow collector information.
sFlow collector ID.
sFlow collector IP address.
sFlow collector port.
Remaining lifetime of the sFlow collector. If this field displays N/A, the sFlow
collector never ages out.
Maximum length of the sFlow data portion in an sFlow packet.
Name of the VPN bound with the sFlow collector. This field is available in
S7500E Release 6703, S7508E-X Release 6903, and their later versions.
Description of the sFlow collector.
Information about the sFlow enabled ports.
sFlow enabled interface.
ID of the target collector, for receiving the counter sampling data.
Counter sampling interval, in seconds.
ID of the target collector for receiving the flow sampling data.
Maximum copied length of a sampled packet.
Packet sampling interval.
Packet sampling mode, which can only be random and samples a random
number of packets.
Status of the sFlow-enabled port:
•
Suspend—The port is down.
•
Active—The port is up.
124
Mode Status
1000 Random
1000 Random
Active
Active